NEC UNIVERGE NEAX 2000 IPS Reference Manual page 90

Chapter 5 Station Equipment
Call Handling Features
Four Local Soft Key Controls (detail functions are dependent on PBX)
Large Message Waiting LED
24 Character, 3-Line LCD
Built-in Headset Jack Connector
Speed Dial/DSS Buttons
Programmable Line Keys with 2-Color LED
Eleven Dedicated Function Keys (Feature, Recall, Conf, Redial, Hold, Transfer, Answer,
Speaker, MIC, Directory and Message
Built-in Half Duplex Hands-free Unit
Note: DTR-4D-1 does not include headset jack or directory and message functions
Convergence Features
Two 10/100 full duplex Ethernet ports- One which connects the Dterm IP to the local Ethernet
Network, the other provides connectivity for a local workstation.
Three types of powering options:
o Local AC adapter
o CDP (Cisco Discovery Protocol) power for those infrastructures with an installed base of
Cisco gear
o Spare pair power across the Ethernet network.
Transportable QoS, which follows the user no matter where they log in.
o Multiple Voice Coding support, which automatically negotiates to a common setting.
o G.711 providing an international standard for encoding/decoding telephony signals on a
64 Kbps Non-compressed channel.
It also supports the compression algorithms G.729A (8Kbps) and G.723.1 (5.3/6.3
o
).
Kbps
Line Conditions
ITR-4D-1
ITR-8D-3
Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub
ITR-16D-3
ITR-16LD-3
ITR-32D-3
Page 5- 4
Note
)
Note
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6