NEC UNIVERGE NEAX 2000 IPS Reference Manual page 305

Station to Station Calling
Station Hunting
Simultaneous voice and data transmission
Asynchronous Data Switching
Synchronous Data Switching
Half/Full Duplex Switchover
5. The ISDN Terminal can provide Voice and data communication via the CCIS network. The CCIS network
must be digital.
6. During communication via the CCIS network, the link reconnection is not available.
7.
The conditions about station services are as follows
Station Hunting
When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy Single Line Tele-
phone/Multiline Terminal, another Single Line Telephone/Multiline Terminal in Station Hunting group is
called. When a Single Line Telephone/Multiline Terminal or an ISDN Terminal calls a busy ISDN
Terminal, an-other ISDN Terminal in Station Hunting group is called
Note: An ISDN Terminal cannot be included in the same Station Hunting group as Single Line
Telephone/Multi-line Terminals.
Call Forwarding
An ISDN Terminal cannot set Call Forwarding - All Calls/- Busy Line/-Don't Answer, and cannot be the
destination of a Call Forwarding. When an ISDN Terminal is a calling station, it can be forwarded to
another Single Line Telephone/Mul-tiline Terminal but cannot be forwarded to central office trunk or tie
line trunk.
Call Transfer
A Single Line Telephone/Multiline Terminal cannot transfer a call in progress with an ISDN Terminal to
another station. In the same way, an ISDN Terminal cannot transfer a call in progress with a Single
Line Telephone/Mul-tiline Terminal to another station.
Terminal converses with CCIS trunk and ISDN trunk, the Single Line Telephone/Multiline Terminal
cannot transfer the call to an ISDN Terminal.
Call Pickup, Call Pickup - Designated group
An ISDN Terminal cannot be assigned to Call Pickup group and cannot pickup a call to another station.
A Single Line Telephone/Multiline Terminal cannot pickup a call to an ISDN Terminal.
Executive Override
During voice communication between a Single Line Telephone/Multiline Terminal and an ISDN
Terminal, another Single Line Telephone/Multiline Terminal can interrupt into only Single Line
Telephone/Multiline Terminal
is not allowed.
Busy Service (Step Call, Call Back)
When a Single Line Telephone/Multiline Terminal calls a busy ISDN Terminal, busy service such as
Step Call and Call Back cannot be provided to the ISDN Terminal. It is the same when an ISDN
Terminal calls a busy Single Line Telephone/Multiline Terminal.
8. When a Single Line Telephone is calling an ISDN Terminal or an ISDN Terminal is busy, hooking service is
not available. Therefore, at this time other services are not available.
9. A Multiline Terminal can call an ISDN Terminal via Primary Extension or Sub Line. And a Multiline Terminal
can be called from an ISDN Terminal via Primary Extension or Sub Line.
10. When a Single Line Telephone/Multiline Terminal calls an ISDN Terminal, it can send the calling station
number to the ISDN Terminal. At this time, ISDN trunk number and local number are also attached to be
sent.
11. Station to Station calling between an attendant console and an ISDN Terminal is not available.
UNIVERGE 2000 IPS Request For Proposal (RFP) Reference Guide
NEAX
Issue 6
Chapter 15 Integrated Services Data Network (ISDN)
:
.
During data communication with an ISDN Terminal, Executive Override
.
While a Single Line Telephone/Multiline
Page 15-5