NEC UNIVERGE NEAX 2000 IPS Reference Manual page 145

Program Download Service Conditions
Do not reset the PBX and the MATWorX during MP program downloading.
Do not pull out the LAN cable during MP program downloading.
FTP (File Transfer Protocol) is used as the protocol for the remote download of MP program.
Only the file specified in "File Name" of CHECKSUM.TXT can be downloaded to the PBX.
If you do not set the directory name to save the program files and CHECKSUM.TXT by
MATWorX, they are saved to the FTP directory (default).
If you do not set the password and user ID of the FTP server by MATWorX, login to the FTP
server with anonymous.
If required FTP server information is not set when executing the MP program download, "DATA
NOT SET" is displayed.
For the TCP port, the specified port is used for file transfer (control), and the port in front of it is
used for the file transfer. For example, when the TCP port is set to 3000, Port No. 3000 is used
for the file transfer (control), and Port No. 2999 is used for the file transfer (Port 21-File transfer
(control), Port 20-File transfer: default).
If you read the issue number of the standby side (outdated side) and change the settings of FTP
information during MP program downloading, "WAIT, BUSY NOW" is displayed
When using a single FTP server to update multiple sites in remote PIM network schedule the file
transfer at least 7 minutes or more apart so that bandwidth and the number of connections to
the FTP server are not exceeded.
Program Changeover Service Conditions
The system is initialized automatically after executing the program changeover any data that is
not backed up will lost. Be sure to execute the office data backup before executing the program
changeover.
If an error is detected during system initialization after executing the program changeover, the
PBX starts automatically with the previous program.
If the program download is executed while the program version matching is being executed, the
program version matching is interrupted, and program download is executed.
If the program changeover (immediate) is executed while the program version matching is being
executed, the program is changed after the program version matching is completed.
The program changeover cannot be executed if the program downloading or program version
matching is interrupted or fails. If the program changeover (immediate) is set, the setting is
invalid.
The program changeover for which the schedule (date/time) has been set is executed only
when the PBX is on-line.
When immediate program changeover is executed after a schedule (date/time) for program
changeover execution is set, the schedule is invalid.
Required Hardware
CP24C/CP31C
MATWorX IPS
PC for MATWorX
PC/Work station for FTP
:
Note MATWorX and FTP server program can be used on the same PC.
UNIVERGE 2000 IPS Request for Proposal (RFP) Reference Guide
NEAX
Issue 6
Equipment
Note
Note
Chapter 8 System Administration
Comments
Stand Alone or Remote PIM network
Version 11.0.0
See MATWorX PC Requirements above
Windows 2000 Server/Windows 2000
Professional/Windows XP Professional
(Internet Information Server (IIS)supplied with
Windows 2000/XPProfessional can be used)
.
Page 8- 7