Communication Environment Setup - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features

Communication Environment Setup

Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
To set up a configuration for communication between the
machine and computers on your network, use the following
procedure.
SNMP
SNMP helps monitor the state of the machine and collects
information on it. The following two items can be set:
<COMMUNITY NAME>:
Sets the SNMP community name. You can specify up to two
community names.
<SNMP WRITABLE>:
Enables the computers on the network to access the machine
and modify its settings if this item is activated. You can specify
this setting for each community separately.
1.
Press [Additional Functions].
Back Previous
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <SNMP
SETTINGS>, then press [OK].
5.
Confirm that <USE SNMP> is displayed, then
press [OK].
TOP
Next
3-10