Canon imaqeRunner 1019J Advanced Operation Manual page 43

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
7.
Use the numeric keys to enter a new
character, then press [OK].
8.
Repeat step 5 to 7 to edit the desired items.
9.
Press [Stop] to return to the standby mode.
Deleting a File Server Address
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
3.
Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED SPD DIAL>, then press
[OK].
4.
Press [ ] or [ ] to select a one-touch
key (01 to 23) or coded dial code (000 to 176)
you want to delete, then press [OK].
You can also select a one-touch key or coded dial code by
pressing the corresponding one-touch key, or [Coded Dial]
followed by the desired three-digit code.
Back Previous
5.
Press [ ] or [ ] to select <HOST NAME>,
then press [OK].
6.
Press and hold [Clear] to delete the entire
entry, then press [OK].
You can also use [Clear] to delete characters one by one.
NOTE
If you delete the file server name, the rest of the settings are
cleared automatically.
7.
Press [Stop] to return to the standby mode.
■
Storing Favorites Buttons
You can register a destination together with any possible
combination of send settings in a favorites button. One-touch
keys 01 to 04 can be registered as favorites buttons.
TOP
Next
1-22