Using The Remote Ui - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features

Using the Remote UI

Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
The Remote UI software enables you to access and manage
the machine from a network computer using a web browser.
● Check the machine status
● Set and control the machine
■
Starting the Remote UI
NOTE
Before you start the Remote UI, perform the following:
– Select <VIEW IP ADDRESS> in <NETWORK SETTINGS> located in
the <SYSTEM SETTINGS>, and verify the IP address of the
machine. If you do not know the IP address, consult with your
network administrator. (See Chapter 3, "Network".)
– Set <REMOTE UI> to <ON> in <SYSTEM SETTINGS>.
1.
Start the web browser.
Back Previous
2.
Enter the IP address of the machine in
[Address] or [Location] → press [Enter] on
the keyboard.
The Remote UI screen appears.
3.
Enter the ID and password.
– For No Management mode: Select [Administrator Mode] or
[End-User Mode] → enter the password or owner name.
– For Department ID Management mode: Enter the department
ID and password.
– For User Management mode: Enter the User ID and
password.
NOTE
For details on the ID and password, see "Managing the
Department/User ID," on p. 4-25.
4.
Click [OK].
TOP
Next
4-4