Canon imaqeRunner 1019J Advanced Operation Manual page 173

Advanced Send
1
Features
Printing Reports Automatically
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
TX REPORT, RX REPORT, and ACTIVITY REPORT can be
set to print automatically.
■
TX REPORT
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <REPORT
SETTINGS>, then press [OK].
3.
Confirm that <SETTINGS> is displayed, then
press [OK].
4.
Confirm that <TX REPORT> is displayed,
then press [OK].
5.
Press [ ] or [ ] to select the setting you
want, then press [OK].
<PRINT ERROR ONLY>: Prints a report only when a
transmission error occurs.
<OUTPUT YES>: Prints a report every time you send a
document.
<OUTPUT NO>: Does not print a report. Skip to step 7.
Back Previous
6.
Confirm that <REPORT WITH TX IMAGE> is
displayed, press [ ] or [
<ON> or <OFF>, then press [OK].
<OFF>: Does not print the first page.
<ON>: Prints the first page.
7.
Press [Stop] to return to the standby mode.
Report Items
The following items are displayed in the Transmission Report:
● Transaction description
● TX/RX NO: Transaction number
● DEPT. ID: If Department ID Management is set, the
Department ID is printed.
● RECIPIENT ADDRESS: Destination fax number or
address
TOP
Next
] to select
7-4