System Monitor - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4

System Monitor

5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
13.
Confirm that <LM ANNOUNCE> is displayed,
then press [OK].
14.
Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<OFF>: Does not notify the LAN Manager of its existence on the
network.
<ON>: Notifies the LAN Manager of its existence on the network.
15.
Press [ ] or [ ] to select <TCP/IP
SETTINGS>, then press [OK].
16.
Press [ ] or [ ] to select <CONFIGURE
WINS>, then press [OK].
17.
Confirm that <WINS RESOLUTION> is
displayed, then press [OK].
18.
Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<OFF>: Does not resolve the name with WINS. Skip to step 21.
<ON>: Resolves the name with WINS.
Back Previous
19.
Confirm that <WINS SERVER> is displayed,
then press [OK].
20.
Use the numeric keys to enter the IP address
of a WINS, then press [OK].
NOTE
If DHCP determines the IP address, the IP address obtained
from a DHCP server is overwritten with the IP address of a
WINS server (obtained from the DHCP server), whenever
possible.
21.
Press [Stop] to return to the standby mode.
22.
Restart the machine.
TOP
Next
3-40