Canon imaqeRunner 1019J Advanced Operation Manual page 162

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3.
Press [ ] or [ ] to select <MANAGE
DEPT. ID>, then press [OK].
4.
Press [ ] or [ ] to select <ON>, then
press [OK].
5.
Press [ ] or [ ] to select <REGISTER
DEPT. ID>, then press [OK].
6.
Press [ ] or [ ] to select the number to
which department will be designated, then
press [OK].
7.
Use the numeric keys to enter the
Department ID, then press [OK].
NOTE
If you do not want to set a password, you can use the machine
by entering only the Department ID.
Back Previous
8.
Press [ ] or [ ] to select <PASSWORD>,
then press [OK].
9.
Use the numeric keys to enter the password,
then press [OK].
10.
Press [ ] or [ ] to select <PAGE LIMIT
SET.>, then press [OK].
11.
Press [ ] or [ ] to select the desired
function, then press [OK].
You can select <TOTAL PRINT>, <COPY>, <SCAN>, <COLOR
SCAN>, or <PRINT>.
NOTE
<TOTAL PRINT> is the sum of <COPY LIMIT> and <PRINT
LIMIT>.
12.
Press [ ] or [ ] to select <RESTRICT
TOTAL> (when <TOTAL PRINT> is selected),
then press [OK].
The message displayed will vary depending on which function
you selected in step 11.
Example: <RESTRICT COPY> appears when <COPY> is
selected.
TOP
Next
6-5