Canon imaqeRunner 1019J Advanced Operation Manual page 35

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
■
Memory Reception
The machine automatically receives faxes in memory when
printing is disabled under certain conditions (e.g., toner or paper
has run out). You can also set the machine to store all
documents in memory without automatically printing them.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3.
Press [ ] or [ ] to select
<COMMUNICATIONS>, then press [OK].
4.
Press [ ] or [ ] to select <MEMORY
LOCK>, then press [OK].
If the memory lock password has already been set, enter the
password, then press [OK].
Back Previous
5.
Press [ ] or [ ] to select <ON>, then
press [OK].
NOTE
When you select <OFF>, the machine starts to print the
received documents in memory.
6.
Confirm that <PASSWORD> is displayed,
then press [OK].
7.
Use the numeric keys to enter the memory
reception password (up to seven digits), then
press [OK].
Ex.
P A S S W O R D
1 2 3 4 5 6 7
8.
Confirm that <REPORT PRINT> is displayed,
then press [OK].
TOP
Next
1-14