Canon imaqeRunner 1019J Advanced Operation Manual page 199

Advanced Send
1
Features
The printer port name is not displayed in [Print to the following
port(s)].
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Are the machine and cable properly
connected?
A Check that the machine is connected to the
network using the proper cable, then restart the
machine. (See "Set the Machine for Network
Usage," in the Quick Start Guide.)
Q Is the computer that is printing properly set up?
A Make sure the proper printer driver is installed.
(See "Installing/Uninstalling Software," in the Quick
Start Guide.)
A Make sure the correct machine is set as the output
destination for the computer that is printing in
[Printers and Faxes] or [Printers].
Back
The machine automatically connects to a destination other than
the intended destination via its dial-up access (when a dial-up
router is connected to your network).
Q Does the dial-up router send packets via
broadcast?
A If the dial-up router does not have to send packets
via broadcast, change the router settings to ensure
that it sends packets via a method other than
broadcast. If dial-up router has to send packets via
broadcast, check that the settings are correct.
Q Dose the file or mail server's host name or IP
address set on the machine exist on the
network?
A Check that the file or mail server's host name or IP
address set on the machine is correct.
TOP
Previous Next
8-23