Canon imaqeRunner 1019J Advanced Operation Manual page 201

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
Unable to send data/share files (FTP).
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Does the SNMP community name match?
A If you use an SNMP community name different
from the one stored in the machine to access the
machine from a utility, the utility will not detect the
machine. In this case, check the SNMP community
name. (See "Communication Environment Setup,"
on p. 3-10.)
Q Is the FTP server set correctly?
A Perform the following to check the server status.
(For Windows, perform these from the MS-DOS
prompt.)
- Example using UNIX, where the FTP server has
the IP address: 192.168.1.195
U:>ftp 192.168.1.195
Connected to 192.168.1.195.
220 canmfs FTP server (UNIX(r) System V
Release 4.0) ready.
User (192.168.1.195:(none)): user_name
*User login
331 Password required for user_name.
Password: *Enter password
230 User user_name logged in.
*Connect to server
Back Previous
ftp> cd/export/share
directory
250 CWD command successful.
ftp> bin *Set data transfer type (binary)
200 Type set to I.
ftp> put sample.tif
verification
ftp> by *Cut off server connection
221 Goodbye
If the above are confirmed and file sharing still
does not operate normally, consult the network
administrator for the environment you are using.
Q Does the machine's address <LOGIN NAME>
setting contains one or more spaces after the
user name?
A Ensure that the machine's address <LOGIN
NAME> setting does not contain spaces after the
user name.
TOP
Next
*Move to data destination
*Set transfer file name for
8-25