Canon imaqeRunner 1019J Advanced Operation Manual page 164

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
6.
Press [ ] or [ ] to select the Department
ID whose password and page limit you want
to change, then press [OK] twice.
7.
Press [ ] or [ ] to select <PASSWORD>,
then press [OK].
8.
Press [Clear] to clear the current password.
9.
Use the numeric keys to enter the new
password, then press [OK].
NOTE
You cannot change the Department ID.
10.
Press [ ] or [ ] to select <PAGE LIMIT
SET.>, then press [OK].
11.
Press [ ] or [ ] to select the desired
function, then press [OK].
You can select <TOTAL PRINT>, <COPY>, <SCAN>, <COLOR
SCAN>, or <PRINT>.
Back Previous
12.
Press [ ] or [ ] to select <RESTRICT
TOTAL> (when <TOTAL PRINT> is selected),
then press [OK].
The message displayed will vary depending on which function
you selected in step 11.
Example: <RESTRICT COPY> appears when <COPY> is
selected.
13.
Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<OFF>: Does not set a page limit restriction. Skip to step 17.
<ON>: Set a page limit restriction.
14.
Press [ ] or [ ] to select <PAGE
TOTALS> (when <TOTAL PRINT> is selected),
then press [OK].
The message displayed will vary depending on which function
you selected in step 11.
Example: <COPY LIMIT> appears when <COPY> is selected.
15.
Press [Clear] to clear the current number of
page limit restriction.
TOP
Next
6-7