Telephone Problems - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features

Telephone Problems

Advanced Copy
Features 2
Cannot dial.
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Set Up the Machine," in the Quick Start Guide.)
Q Is the power cord plugged in securely?
A Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine
is plugged into a power strip, make sure the power
strip is plugged in and turned on.
Q Is the main power switch turned on?
A Turn on the main power switch.
Back
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct
telephone line type. (See "Set the Machine for
Sending Faxes," in the Quick Start Guide.)
Telephone disconnects while you are talking.
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Set Up the Machine," in the Quick Start Guide.)
Q Is the telephone cable defective?
A Use another cord.
TOP
Previous Next
8-20