Dialing An Overseas Number (With Pauses) - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
■
Dialing an Overseas Number (With
Pauses)
When you dial or register an overseas number, you may need to
insert a pause within the number.
1.
Set documents.
2.
Press [SEND].
3.
Confirm that <FAX> is displayed, then press
[OK].
4.
Adjust any necessary settings for your
documents.
5.
Use the numeric keys to dial the international
access code.
For details on international access codes, contact your local
telephone company.
6.
If necessary, press [Pause] to insert a pause.
Ex.
F A X N U M B E R
= 1 2 3 p 1 2 X X X X
– The letter <p> is displayed between the numbers.
– You can enter successive pauses within the fax number to
make the pause time longer.
– You can change the length of a pause inserted within the fax
number in the <PAUSE TIME> menu. The default setting is
two second.
Back Previous
7.
Use the numeric keys to dial the country
code, the area code, and the fax/telephone
number of the recipient.
8.
Press [Pause] to enter a pause at the end of
the number.
– The letter <P> appears at the end of the fax number.
– Pauses entered at the end of fax numbers are always 10
seconds long.
9.
Press [Start].
When you set the documents on the platen glass, press [
[ ] to select the document size, then press [Start] for each
document. When scanning is complete, press [OK] to start
sending.
TOP
Next
] or
1-10