Canon imaqeRunner 1019J Advanced Operation Manual page 29

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3.
Confirm that <COMMON SETTINGS> is
selected, then press [OK].
4.
Confirm that <TX SETTINGS> is selected,
then press [OK].
5.
Press [ ] or [ ] to select <SEND
SETTINGS>, then press [OK].
6.
Confirm that <TX FILE NAME> is displayed,
then press [OK].
7.
Use the numeric keys to enter the
document's name (up to 24 characters), then
press [OK].
8.
Confirm that <SUBJECT> is displayed, then
press [OK].
9.
Use the numeric keys to enter the subject (up
to 40 characters), then press [OK].
Back Previous
10.
Confirm that <MESSAGE TEXT> is displayed,
then press [OK].
11.
Use the numeric keys to enter the message
body text (up to 140 characters), then press
[OK].
12.
Confirm that <REPLY-TO> is displayed, then
press [OK].
13.
Use the numeric keys to enter the reply-to
address (up to 120 characters), then press
[OK].
14.
Confirm that <E-MAIL PRIORITY> is
displayed, then press [OK].
15.
Press [ ] or [ ] to select the priority
(<NORMAL>, <LOW> or <HIGH>), then press
[OK].
16.
Press [Stop] to return to the standby mode.
TOP
Next
1-8