Canon imaqeRunner 1019J Advanced Operation Manual page 184

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
Q Is the telephone cable connected properly?
A Make sure the cable is connected properly. (See
"Set Up the Machine," in the Quick Start Guide.)
Q Is the telephone line working properly?
A Make sure there is a dial tone when you press
[Hook] or when you lift the handset of any external
telephone connected to the machine. If there is no
dial tone, contact your local telephone company.
Q Is the recipient's machine a G3 fax machine?
A Make sure the recipient's machine is compatible
with your machine.
Back Previous
Q Is BUSY/NO SIGNAL shown on the ERROR TX
REPORT?
A The fax number you dialed is busy. Try sending the
document later.
A The recipient's machine is not working. Ask the
recipient to check the machine.
Q Did the recipient's machine answer within 35
seconds (after all automatic redialing
attempts)?
A Ask the recipient to check the machine. For an
overseas call, add pauses to the registered
number. (See "Dialing an Overseas Number (With
Pauses)," on p. 1-10.)
Q Is the Processing/Data indicator lit?
A The external phone is busy. Please wait until the
external phone becomes free.
TOP
Next
8-8