Communication Environment Setup; Settings From The Control Panel - Canon CLC3220 Network Manual

Communication Environment Setup

To set up a configuration for communication between the machine and computers on your
network, follow the procedures below.
NOTE
After configuring TCP/IP settings, you can change the content by using a web browser (Remote UI).

Settings from the Control Panel

The procedure for specifying the settings from the control panel is as follows:
1
Specify the SNMP settings.
● If you want to set or browse each item of the machine with a utility that uses
SNMP to obtain information:
❑
Press
❑
Press [▼] or [▲] until [SNMP Settings] appears ➞ press [SNMP Settings].
➞ [System Settings] ➞ [Network Settings].

Communication Environment Setup

2
2-17