Send Settings - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
3.
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <TX
SETTINGS>, then press [OK].
5.
Press [ ] or [ ] to select <AUTO
REDIAL>, then press [OK].
6.
Press [ ] or [ ] to select <ON>, then
press [OK].
7.
Confirm that <REDIAL TIMES> is displayed,
then press [OK].
8.
Use [ ], [ ], or numeric keys to enter the
number of redials (1 to 10 times) the machine
will make, then press [OK].
9.
Confirm that <REDIAL INTERVAL> is
displayed, then press [OK].
10.
Use [ ], [ ], or numeric keys to enter the
time (2 to 99 minutes, in one-minute
increments) between redials, then press
[OK].
Back Previous
11.
Confirm that <TX ERROR REDIAL> is
displayed, then press [OK].
12.
Press [ ] or [ ] to select <ON> or
<OFF>, then press [OK].
<ON>: Resends all pages if an error occurs during transmission.
<OFF>: Does not redial even if an error occurs during
transmission.
13.
Press [Stop] to return to the standby mode.
■

Send Settings

You can set the document's name, a subject line, message body
text, and reply-to address, and e-mail priority common to all
sending jobs. The following settings will be effective when
sending documents depending on the sending method you
select:
– E-mail: <TX FILE NAME>, <SUBJECT>, <MESSAGE
TEXT>, <REPLY-TO>, <E-MAIL PRIORITY>
– I-fax: <TX FILE NAME>, <SUBJECT>, <MESSAGE TEXT>,
<REPLY-TO>
– File server (FTP and SMB): <TX FILE NAME>, <MESSAGE
TEXT>
TOP
Next
1-7