System Monitor; Remote Ui; System Manager Settings; Reports And Lists - Canon imaqeRunner 1019J Advanced Operation Manual

Advanced Send
1
Features

Checking Job and Machine Status

Advanced Copy
Features 2
Network
3

Remote UI

4

System Monitor

5
System Manager
Settings 6

Reports and Lists

7

Troubleshooting

8
Appendix
9
Table of Contents
Index
System monitor enables you to view the transmission and
reception results, monitor the status of the copy, send,
receive, report, and print jobs currently being processed.
■
Checking Transmission/Reception
Results
1.
Press [System Monitor].
2.
Press [ ] or [ ] to select <TX/RX LOG>,
then press [OK].
3.
Press [ ] or [ ] to view the required
transmission/reception result.
4.
Press [Stop] to return to the standby mode.
NOTE
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM
SETTINGS>, transmission/reception result does not appear in
the LCD.
Back Previous
■
Checking and Deleting Documents
Stored in Memory
1.
Press [System Monitor].
2.
Press [ ] or [ ] to select <RX/TX
STATUS>, then press [OK].
3.
Press [ ] or [ ] to select the desired
document, then press [OK].
If you select a document with the message <TX STNDBY>,
<TX TRM...>, or <RX TRM...>, skip to step 5.
4.
If you want to delete the document, press
[ ] or [ ] to select <CANCEL>, then
press [OK].
5.
Press [ ] to select <YES>.
If you do not want to cancel the job, press [
6.
Press [Stop] to return to the standby mode.
TOP
Next
] to select <NO>.
5-2