Canon imaqeRunner 1019J Advanced Operation Manual page 100

Advanced Send
1
Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Manager ID and System Password have been set,
enter the System Manager ID and System Password using the
numeric keys, then press [Log In/Out].
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <SMB
SETTINGS>, then press [OK].
5.
Confirm that <USE SMB CLIENT> is
displayed, then press [OK].
6.
Press [ ] or [ ] to select <ON>, then
press [OK].
7.
Confirm that <SERVER> is displayed, then
press [OK].
Back Previous
8.
Use the numeric keys to enter the NetBIOS
name of the machine, then press [OK].
NOTE
– Be sure to enter a unique name that does not exist as a name
for another computer or printer on the same network.
– You cannot enter a character string that includes blanks.
9.
Confirm that <WORKGROUP> is displayed,
then press [OK].
10.
Use the numeric keys to enter the name of
the workgroup the machine belongs to, then
press [OK].
NOTE
– You cannot enter the domain name as the workgroup name.
– You cannot enter a character string that includes blanks.
11.
Confirm that <COMMENT> is displayed, then
press [OK].
12.
If necessary, use the numeric keys to enter a
comment, then press [OK].
TOP
Next
3-39