Canon imaqeRunner 1019J Advanced Operation Manual page 32

Advanced Send
1
Features
Receiving Features
Advanced Copy
Features 2
Network
3
Remote UI
4
System Monitor
5
System Manager
Settings 6
Reports and Lists
7
Troubleshooting
8
Appendix
9
Table of Contents
Index
You can set the fax receive mode to suit your needs, set the
machine to receive fax/I-fax documents into memory
(memory lock), forward received fax/I-fax documents to
other machines or file servers, and use the external
telephone connected to the machine to receive faxes
manually (remote reception). You can also set how the
received documents are printed.
■
Setting Receive Mode
To determine the right mode for you, see "Set the Machine for
Receiving Faxes," in the Quick Start Guide.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3.
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <RX
SETTINGS>, then press [OK].
Back Previous
5.
Press [ ] or [ ] to select <RX MODE>,
then press [OK].
6.
Press [ ] or [ ] to select the desired
receive mode, then press [OK].
<FaxOnly>: Answers all calls as faxes.
<FaxTel>: Switches between fax and voice calls automatically.
For optional settings, see "FaxTel: Optional Settings," on p. 1-12.
<AnsMode>: Receives faxes automatically and records voice
messages.
<DRPD> (Distinctive Ring Pattern Detection): Distinguishes
between fax and voice calls using distinctive ring patterns. Select
the ring pattern assigned by your telephone company. For
optional settings, see "DRPD: Optional Settings," on p. 1-13.
<Manual>: Does not answer any calls. You have to manually
receive faxes.
NOTE
– For <FaxTel> or <Manual>, make sure an external telephone
is connected to the machine.
– For <FaxTel>, make sure <INCOMING RING> is set to <ON>
so that the external telephone rings when the machine
receives a voice call.
– For <AnsMode>, make sure an answering machine is
connected to the machine.
– For <DRPD>, subscription to a DRPD service is required.
Contact your telephone company for availability.
7.
Press [Stop] to return to the standby mode.
TOP
Next
1-11