Replacing the filters
The filters should be replaced every 6 to
9 months and whenever worn or
damaged. Replacement filters are
available from your Black & Decker
dealer (catalogue number: VF45 for
CV9605H, catalogue number: VF40 for
all other models).
Remove the old filters as described
Fit the new filters as described above.
Protecting the environment
Separate collection. This
product must not be disposed of
with normal household waste.
Should you find one day that your
Black & Decker product needs replacement,
or if it is of no further use to you, do not
dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the
end of their working life. To take
advantage of this service please return
your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
Battery (fig. L - N)
Black & Decker batteries can
be recharged many times.
At the end of their useful life,
discard batteries with due care
for our environment.
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.
Preferably discharge the battery by
operating the appliance until the
The battery is located under the back
end of the appliance.
Take the accessories from the
Remove the screws (13).
Unlock the tabs (14) holding the
accessory holder in place.
Remove the accessory holder (15).
Remove the screws (16) holding the
battery in place.
Slide the battery (17) backward as
Remove the battery.
Place the battery in a suitable
packaging to ensure that the
terminals cannot be short-circuited.
Take the battery to your service
agent or a local recycling station.
Warning! Once removed, the battery
cannot be refitted.