Fujitsu PRIMERGY RX600 S4 User Manual page 57

For Windows Server 2003 R2 / Windows Server 2003 R2 x64
1. Insert the OS CD/DVD (Installation disc) Disc 1.
After files are copied, a message prompts you to insert the Disc 2.
2. Insert the OS CD/DVD (Installation disc) Disc 2.
After files are copied, a message prompts you to eject the CD/DVD and floppy disk.
11
Eject the CD/DVD and floppy disk and click [OK].
The system is restarted.
The system continues the installation operation after restart.
Setup of OS GUI and installation of LAN utility, Service Pack, and Active Directory are
performed automatically.
12
When a confirmation message to restart appears, click [Restart].
The system restarts and installs high reliability tools.
Thus the Command Prompt windows may appear and disappear during installation of Server-
View, the installation process is properly proceeding.
13
Press the [Enter] key when a message notifies completion of installation.
14
Restart the system.
Click [Start] – [Shutdown]. Select [Restart] and click [OK].
The system restarts.
15
Configure the settings for the RAID management tool (ServerView RAID).
For the setting procedures, refer to the manuals in Array Controller Document & Tool CD.
• Settings of an array administrator account
The Windows user account is required when using ServerView RAID. Create a group named
"raid-adm", and an account with any name for an array administrator within the group "raid-
adm".
• Configuration of HDD Check Scheduler
Modify the settings of HDD Check Scheduler if necessary. It has been set at 12 o'clock every
day as a default setting.
• Configuration of Battery Recalibration Scheduler
Modify the settings of Battery Recalibration Scheduler if necessary. It has been set at 11
o'clock on the first day of every month as a default setting.
The server setup and OS installation have been completed.
Refer to "Chapter 4 Operations after OS Installation" ( pg.73) and perform necessary procedures before
starting server operations.
PRIMERGY RX600 S4 User's Guide
57