Network Configuration; Main Window - Fujitsu PRIMERGY RX600 S4 User Manual

Some operations such as a license window and media replacements are required to be performed
manually.
High reliability tools are software with comprehensive strength for stable system operation of the
server management.
Merit with ServerStart setup

Network configuration

ServerStart can configure a network on server installation. For details on available network patterns,
refer to "Using ServerStart to Configure the Network".
Automatic driver installation
Recommended drivers for automatically recognized expansion cards are installed with the server. This
prevents possible mistakes in driver installation, such as installation of an older version or drivers which
were not supplied with this server.
Automatic RAID configuration
Even without RAID utility, a disk array can be configured by specifying a RAID type and the number of
hard disk units.
Intuitive user interface
The intuitive user interface allows you to easily set the necessary information.

Main window

When ServerStart starts up, the following window appears. The window and tool bar differ, depending
on the mode.
PRIMERGY RX600 S4 User's Guide
17