Starting Os Installation - Fujitsu PRIMERGY RX600 S4 User Manual

3.2.5 Starting OS Installation

Install the operating system to the server.
Notes on the installation
When the installation partition is not empty, a confirmation message appears. Unless otherwise
considered as problem, click [OK] to continue the installation procedure.
If an incorrect setting (such as the CD key) is found during installation, an error window will appear.
Enter the correct values in the window to continue the installation procedure. However, corrections
made here are not reflected on the configuration file.
1
Click [Click here, to Start the Installation of (OS)].
A confirmation window asking whether you want to save the current settings appears.
2
Click [Yes].
The following window appears.
3
Enter the file name and click [Save As].
Installation starts automatically.
1. If a message prompts you to insert Array Controller Document & Tool CD, insert
the CD-ROM and click [OK].
2. If a message prompts you to insert the Service Pack CD-ROM, insert the CD-ROM
and click [OK].
3. For Window Server 2003 x64, a message appears and prompts you to insert
Startup Disc Win64 and restart the system. Insert Startup Disc Win64.
PRIMERGY RX600 S4 User's Guide
69