Fujitsu PRIMERGY RX600 S4 User Manual page 118

Chapter 6 Installing Internal Options
7
Install the CPU.
Align the triangle on the CPU socket (pin no. 1 marking) with the triangle on the CPU (1). Insert
the pins into the socket, and then return the socket lever to the original position (2).
Pin no.1 marking
8
Attach the heat sink.
Attach the heat sink to the installed CPU and fasten it with the four screws.
Carefully tighten the screws in diagonal order.
Heat sink
118
CPU
(1)
• When installing the CPU in the socket, be careful not to bend the
CPU pins.
• When attaching the heat sink, keep the heat sink from the
condenser on the baseboard.
(2)