Call Forwarding/Do Not Disturb; Logging In To Or Logging Out Of A Group (Kx-Ut133/Kx-Ut136 Only); Logging In To Or Logging Out Of An Acd (Automatic Call Distribution) Group - Panasonic KX-UT113 Operating Instructions Manual

Call Forwarding/Do Not
Disturb
You can have incoming calls automatically forwarded
to another destination. You can also have incoming
calls rejected (Do Not Disturb).
Note
•
When Call Forwarding or Do Not Disturb is
enabled, FWD/DND
stand-by mode.
To access the FWD/DND settings
1.
In stand-by mode, press
NOT DISTURB].
•
If you press [FORWARD/DO NOT DISTURB],
continue to step 3.
2.
Press [ ] or [ ] to select "FWD/DND Setting", and
then press [ENTER].
3.
If line selection is available, press [ ] or [ ] to select
the desired line, and then press [ENTER].
4.
Press [ ] or [ ] to select the type of FWD or DND
setting to apply, and then press [ENTER].
5.
Configure the settings as necessary (Page 40).
Document Version 2011-06
appears on the display in
or [FORWARD/DO
Logging in to or Logging
out of a Group
(KX-UT133/KX-UT136
only)
Logging in to or Logging out of
an ACD (Automatic Call
Distribution) Group
If the SIP server supports ACD and you are assigned
to an ACD group, you can log in to or log out of the
group.
1.
In stand-by mode, press the flexible button
assigned as the ACD Log-in/Log-out button.
Note
•
The flexible button's light indicates the status as
follows:
Off: logged in to the ACD group
Red On: logged out of the ACD group
Feature Operations
Operating Instructions 33