Version History - Image Access WideTEK 36C Operation Manual

Version History

Version Published in
A May 2011
A2 July 2011
A3 September 2011
A4 October 2011
A5 December 2011
B April 2012
B1 March 2013
B2 June 2013
C December 2013
D April 2014
D2 September 2014
E December 2015
EMC information according to the standard EN 55022
Warning!
This is a class A device. Operation of these equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Page 6
Content/Changes/Supplements
Preliminary version.
Information after EMC and safety testing and certification added.
Chapter C.3.9: New content, former chapter C.3.9 renumbered to
C.3.10.
Content of chapter C.5.2 revised, new screenshots added.
Chapter B.6.3.1 added. In Chapter C.3.3 additional information
about "Container" format for multipage output. Chapter C.3.7.2
added.
FCC note added in chapter E.6.
Update Technical Data
Update of content of User Settings (FW Vers. 5.71).
New structure in chapter C.3.5 and its subfolder.
Valid with firmware 5.8.
Copyright note with updated trademark information.
The new WideTEK 36C
®
New: Chapter B.5.1. Zonal OCR
Previous chapter B.5.1 and all following chapters renumbered.
New screen screenshots of some kiosk application screens.
Section D describes now the "Setup Level". Former chapter D and
E have been renumbered.
Section C: Content change because of introduction of the new
user interface ScanWizard.
Combination of the WideTEK
manuals in one manual.
Differences between the scanner models will be highlighted.
Chapter B.3.2, B.3.3, B.3.5 and B.3.6 with new content.
Chapter B.1.1, chapter D.1.3.2, chapter D.1.3.4 added.
Chapter C.1.1 and C.1.1 added. Table in chapter E.1 modified.
Chapters in new order. Description of the ScanWizard touchscreen
interface added.
logo has been introduced.
36C / WideTEK
®
48C
®
operation
Manual