Remote Controller Operation; Installation Of Optional Air Panel Phkf160Paq1; Factory-Supplied Accessories; Installation - Hitachi AirCore 700 Operation Installation Maintenance Manual

Single split inverter series indoor unit
Table of Contents

Advertisement

7. Remote Controller Operation

DSW9: Iconic panel setting
Iconic panle is an accessory part.
Refer to the right picture for the setting.
7. Remote Controller Operation
Please refer to the Installation and Operation manual of wired remote controller(PC-ARFG2-Z) or
wireless remote controller (PC-LH8QE).

8. Installation of Optional Air Panel PHKF160PAQ1

8.1 Factory-supplied Accessories

CAUTION
!
When the air panel is unpacked, place it on insulation material, etc. to protect the sealing insulation
from scratches.
Check to ensure that the accessories are packed with the air panel.
Long Screw ( M6 Cross Screw)
If any of these accessories are not packed in the packing, please contact your contractor.

8.2 Installation

Check the indoor unit height from the false ceiling surface
Check the distance between the indoor unit and the false ceiling.
It is 12+5mm as shown below.
If not, adjust the distance by using the checking scale with maintaining the levelness of the indoor unit.
DSW9(3rd digit) Iconic Panel Setting
Set the position
Before delivery, the setting of the 3rd
digit is "0". When installing iconic panel,
the setting is changed to be "1".
Accessory
-21-
PHKF160PAQ1
Purpose
4
For fixing air panel

Advertisement

Table of Contents
loading

Table of Contents