Compensator Assembly Removal; Compensator Assembly Overhaul - MV Agusta F4 1000 Workshop Manual

Hide thumbs Also See for F4 1000:

Table of Contents

Suspension and wheels

Compensator assembly removal

Remove the special screw (1) that fixes the compen-

sator assembly of the rear suspension to the mono-

arm fork. Extract the complete compensator assembly.

Remove the anti-dust seal (1).

Check the condition of the roller bearings and if it is

necessary to substitute them, utilise an extractor as

shown in the figure.

Check for eventual axial play of the bolt holes of the

connecting rod (2). Substitute if worn.