Selecting And Setting The Display Functions; Selecting The Display Functions - MV Agusta F4 1000 Workshop Manual

Selecting and setting the display functions

Some of the main measurements of the instruments
may be changed.
The available options include:
- Select an operating mode:
"RUN" (Odometer)
"TC" (Traction control)
"CHRONO" (Chronometer)
"NIGHT/DAY" (Night/Day Mode)
- Reset the trip counter:
Trip counter 1
Trip counter 2
- Turn on the chronometer
- "IMMOBILIZER" function (Anti-theft system)
- Control unit mapping selection

Selecting the display functions

The following settings may be changed on the display:
• "RUN" (Odometer)
• "TC" (Traction control)
• "CHRONO" (Chronometer)
• "NIGHT/DAY" (Night/Day Mode)
To display the operating modes, press "SET" for less
than four seconds. When pressed, the display shows
all modes, in a sequence. Select the desired mode.
WARNING
The operation must be performed while the
engine off, the gears are in neutral, the
motorcycle is stationary, and with the feet
on the ground. Do not set the display func-
tions while riding.
Maintenance Maintenance
"TRIP 1"
"TRIP 2"
- 63 -
B