Screw ring assembly
After having accurately cleaned the screw ring and the
seats of the steering head on the frame, grease the
screw ring and screw it in manually onto the relative
seat.
Grease only the first threads and the conical
section of the ring nut.
Recommended grease Agip Grease 30
Utilising the special tool, tighten the screw ring (1) to
the prescribed torque pressure.
Special tool No. 800092857
Torque pressure: 120 ÷ 125 N·m
During this tightening operation, press down with force
onto the head of the special tool.
Steering base assembly
Accurately clean all the parts and check the general
condition.
Before reassembly, grease the ball bearing ring and
place it onto the steering pin.
Recommended grease Agip Grease 30
Suspension and wheels
- 31 -
120÷125 N•m
1
F