Table of Contents
Advertisement
Reassembly of the frame head steering sleeve
Clean the parts accurately so that a visual check can
be made of the tube and the seats.
There should not be marks or lines in the bearing
seats. If so, substitute the parts as necessary.
Lightly grease the contact area of the frame head
F
steering sleeve (see figure) and the threaded part with
Agip Grease 30.
Accurately clean the bearing seats on the frame head
steering sleeve.
Recommended grease Agip Grease 30
Reassemble the frame head steering sleeve aligning
the slot on the frame head steering sleeve with the
threaded hole on the frame head (see figure).
When the slotted hole is aligned with the hole, turn in
head tube adjusting screw (1).
Tighten screw (1) with the prescribed torque.
Grease only the first threads.
Torque pressure: 18 ÷ 20 N·m
Suspension and wheels
- 30 -
1
Advertisement
Table of Contents
