Table of Contents
Advertisement
WHEELS
Visual check ¨
At the first 1000 kilometres and
then every 6000 kilometres (at
least every tyre change)
After having visually checked or following even light
collision damage, it is necessary to check the planari-
ty, the eccentricity and the ovalisation of the wheel.
See the control procedures described in chapter F
"Suspension and wheels".
REAR WHEEL HUB
Check and lubricate bearings ¨
Substitute ¨
To check and overhaul the rear wheel hub unit, it is
necessary to carry out certain preliminary operations
by consulting the relative chapters.
Remove the rear wheel (see chapter F "Suspension
and wheels"). Lift up the motorcycle by utilising a
mechanic's lift. Remove the Seeger ring of the crown
wheel fixing nut (see chapter F "Suspension and
wheels). Slacken the fixing nut of the wheel axis (see
chapter F "Suspension and wheels").
Remove the brake caliper (see chapter H "Brakes").
Check and overhaul the rear wheel hub unit (see chap-
ter F "Suspension and wheels").
SWINGARM BEARINGS
Check and lubricate ¨
If excessive play is found on the swingarm, due to the
bearings assembled on the central pin of the
swingarm/frame, substitute them as described in chap-
ter F "Suspension and wheels".
Maintenance
Maintenance
Every
12000
kilometres
Every
36000
kilometres
Every 36000 kilometres
- 57 -
B
Advertisement
Table of Contents
