Suspension and wheels
Tighten the plug with the prescribed torque.
20 N•m
Fork leg plug tightening torque: 20 N•m
Insert and screw in the complete cap (1) on the fork sli-
F
der.
1
Fitting the fork legs
Reassemble the stem taking care to pass the electrical
wiring and the clutch tube inside the stem (between the
stem and the steering head).
To ensure proper positioning of the rods, refer to the
figure at right, taking care to observe fitting dimension
"X":
- F4 1000:
X = 212 mm
- 20 -