54
Chapter 4 Configuration switch settings
Table 9
passwords and user-defined configurations
Table 9 Switch settings to disable switch settings for resetting the passwords
Table 10
conditions.
Table 10 Switch settings for resetting factory default conditions
313369-A
shows the switch settings to disable the switch settings for resetting the
and user-defined configurations
1
2
OFF
•
•
ON
shows the switch settings for resetting your unit to factory default
1
2
OFF
•
•
ON
Caution: If you use these switch settings to reset your unit to factory
default conditions, the following user-defined settings are removed or
reset: passwords, hosts, port mappings, unit configuration, access
restrictions, Web site list, cookie control settings, unit registration, and
encryption authorization.
Caution: If you purchased and installed the 3DES Encryption Module
(part number DM0010001), you need to reinstall it.
Caution: If you used the switch settings in
settings for resetting the passwords and user-defined configurations,
these settings are re-enabled.
.
3
4
5
•
•
•
3
4
5
•
•
•
Table 9
6
7
8
•
•
•
6
7
8
•
•
•
to disable the switch