4 Scan
Operations during Scanning
The following describes the operations available during scanning. The following shows
the reference for each operation.
Stopping the Scan Job
To cancel scanning a document, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
4
2
Select [Cancel].
If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the job in progress, a screen for canceling the job may not appear. In
that case, use the following procedure to cancel the scan job on the [Current and
Pending Jobs] screen in Job Status.
126
Stopping the Scan Job ...............................................................................................................126
Changing Scan Settings ............................................................................................................127
1
2
3
4
5
6
7
8
9
0
#
C
<Stop> button