Front Master Cylinder Inspection/Reassembly - Honda GoldWing GL1100 Service Manual

Inspection!Reassembly
Check the condition of the and the and
secondary cups, any part that is deteriorated.
Replace any part that is worn beyond its service limit
Measure the master cvl'in(jer I. D. and
Standard
0,0,
Service
limit
Coat all parts with clean brake fluid and install the in
the master Be careful the don't turn inside out
when the cups are installed. Make sure the is
seated in its groove.
With the in
cylinder baSEl.
reinstall the reservoir on the master
DIAPHRAGM
FRONT MASTER
CYLINDER BODY
1 17