Table of Contents
Advertisement
Frame and Suspension
Swingarm - - - - - - - - - - - - - - - - - - - - - - - - - -
Place the mCltorcvcle on the center stand on a level surface.
Loosen the final gear case nuts, then remove the rear wheel.
Disconnect the drive shaft from the
Disconnect the shock absorber from
the
final drive gear caSe
and remove the case
11
NOTE: Do not
the final drive case over on its side.
gear oil may flow out of the breather,
Disconnect the left shock absorber from the
""\lIf;n,n""rm
hang by the brake hose,
CAUTION: Do not
the
Remove
the
brake
Remove
the
brake hose from the
swm~lanl1
and torque arm
hose
Loosen the lock nut on the left side with the lock nut wrench
adaptor and remove the
bolt
Remove the
and left
caps,
Remove the
"w'inc,,,,nm
from the mClto!'cYlcle.
Remove the
bolt,
12..34
Advertisement
Table of Contents
Troubleshooting
