Table of Contents
Advertisement
Brakes
Front Master Cylinder
(cont'd)
_
Position the master
bracket on the handlebar with the
punch mark down. Then mate the master
the bracket
above the
mark on the handlebar.
the upper holder bolt first, then the lower bolt.
Install and torque the brake line bolt with washers. and pull on
the dust cover. Reinstall the brake lever and rear view mirror.
Connect the brake
switch wires.
Fill the reservoir to the upper level with fresh DOT 3 brake fluid.
bleed the system. then refill.
1 18
Advertisement
Table of Contents
Troubleshooting
