Headlight Aim; Clutch - Honda GoldWing GL1100 Service Manual

Headlight Aim
To the remove the reflectors on
each side of the case. Loosen the case
mClUnltlnq bolts and rotate the case. the mc)Url!lflg
bolts and install the reflectors.
WARNING: An adjusted headlight
may
telnplorarily blind oncoming drivers, or it may fail to light
the road for a safe distance.
local laws
function Dr<>O€lrlv,
the hel,dlight beam as spl~cilied
Make sure all
NOTE:
and
re~lul<ltioln,
the screw on the
headiiigl1t rim. Tum the screw clockwise to move
the beam toward the rider's left.
lutch -- - - - - - - - - -
Make minor with the at the clutch
lever. back the dust cover, loosen the lock nut, and turn
the the lock nut and reinstall the dust
cover.
NOTE: Do not expose more than 8 mm
threads the lever holder.
measured
of
adJ'ustl~r
6
is 10-20 mm Normal clutch leverfree
at the end of the lever.
Check the clutch cable for kinks or of wear that could
cause or failure. if necessary.
Lubricate the clutch cable with a available
cable lubricant to prevent premature wear and corrosion.
3..23