Carburetors/Air Chamber System Installation - Honda GoldWing GL1100 Service Manual

Connect the choke link arm to the No. 3 carburetor and
install the two washers with new cotter
Install the throttle
111"""1::1""
bending the
dUJU::illll1::l
arm.
Sp,~ci1;ied clearance: 10 mm (0.4 in)
on the carburetors but do not tighten
until the complete system is installed on
Install the intake
the hose
the
the accelerator pump before the car-
buretors on the Measure the clearance between
the arm and stopper on the carburetor
Carburetors/Air Chamber - - - - - - - - - - - - - - - - - -
System Installation
Instal! the carburetor/air chamber system on the
the left side. Reconnect the throttle cables while the
is accessible before final is made.
the installation of the carburetor/air chamber
system in the reverse order of removal.
Install the No.1 and No.3 vacuum chamber tops.
Svnclhro,nil~e
the carburetors 3-1
4-13