Crankshaft Removal And Inspection - Honda GoldWing GL1100 Service Manual

Crankshaft Removal and Inspection
Remove the
nrIJTlarv
chain oiler.
Lift up the mainshaft with the
nnmarv
driven gear and clutch
as!,en,blv, and it out the chain.
NOTE: Before caps, note that
the arrow on each cap toward the top of the
The No.1 cap is at the front of the and the No.3 cap
is at the rear. The center cap takes the two bolts.
Remove the crankshaft main
crankshaft from the case.
caps and lift the
Set crankshaft a stand or vee blocks. Set a dial
indicator on the center mam
hp.,uirlo
Rotate the crankshaft and determine the amount of runout.
Crankshaft Runout:
Service limit: 0.050 mm (0.0019
8-13