Table of Contents
Advertisement
Frame and Suspension
Handlebar
eplacement
(cont'd) - - - - - - - - - - - - - - - - -
the
on the bottom half of each switch aSi.,ernbly
the hole in the handlebar. Then assemble each switch
the screws ser::urely
CAUTION: Make sure the wire harness is not pirlcl1led
between the switch
and
the
handlebar.
master
on the handlebar.
with the punch mark down
the two
gap between the holder and master
with
mark
the handlebar.
the top bolt to
specified torque first, then
to the same torque.
Position
the
Position
clutch lever holder so the gap
with the
rnark on the handlebar and
the bolt seJ::urelv
contact cement to the left handlebar
and
the handlebar end caps, wire harness bands. and
1
Advertisement
Table of Contents
Troubleshooting
