Table of Contents
Advertisement
Maintenance
lutch
lock nut
1980-1981
Loosen the lock nut at the clutch lever and turn the adJiuster
clutch
lifter cap.
Remove the
Loosen the clutch lifter lock nut and turn the
aUJu~mlllg
until a
resistance
felt From this nOisition.
ad:lustmg screw counter-clockwise
1
turn and
At the scheduled maintenance intervals
adJus1tml3nt at all
aUIUl>llfl\J
Install the clutch lifter
All Models, AI! Years:
At the lower end of the clutch cable on the
loosen
the lock nut. Turn the
nut to obtain 15 mm
free
at the lower clutch lever.
the lock nut.
Make the final
;lnllw:rtm,,,nt
with the adiuster at the clutch
hand lever.
After
be sure all lock nuts are
~,,\,un,ny.
Test ride the
and make sure the clutch
engages
and does not
Side Stand
Check the rubber
for deterioration or wear. If wear
extends to the wear line,
with a pad marked "Over
260lbs
GOOD
REPLACE
WEAR LINE
side stand
Check the
stand
for
and loss of tension.
Check the side stand for dalmalge and freedom of movement.
recluir'ed to fold up the side stand is
• 5.5 Ib) when
with a
Make sure
force
1.5
·2.5
scale as shown,
Advertisement
Table of Contents
Troubleshooting
