Table of Contents
Advertisement
Tighten the top bridge clamp bolt to the spElcilied torque,
Install all rernainirlg parts in the reverse order of removal. Refer
to
front fork
12-17) and handlebar replace-
ment
1
Remove the air valve cap and release air pressure (except
Rear Shock Absorber
Removal
NOTE: Place the
on the center stand and
remove one shock absorber at
a
time to facilitate removal
and installation,
side cover.
On
the
Selector
button. DeprE1SS and hold the Air Pressure Decrease button
until
pressure is
released.
Remove the seat and
Disconnect the air pressure switch wire connector.
Remove the
nut and remove the
12-29
Advertisement
Table of Contents
Troubleshooting
