Carburetor - Idle Speed; Radiator-Coolant, Hoses And Core - Honda GoldWing GL1100 Service Manual

Carburetor -Idle Speed
carburetor idle speed after all other
adJiustmen'ts are within
sp~ecil'icatio,n
.
.. The must be warm for accurate idle inspection and
adjustment. Ten minutes of riding is sufficient.
Warm up the engine, shift to neutral, and place the motorcycle
on its center stand.
idle with the throttle stop screw.
Idle speed:
950
±
100
rpm.
Radiator-Coolant Hoses, and Core - - - - - - - - - - - - - -
the top compartment cover and remove the tool tray.
Check the coolant level in the reserve tank with the engine
at normal temperature. It should be between
the
FULL
and lOW
level lines.
If necessary, remove the reserve tank cap and
fill
to the FULL
level line.
WARNING: Avoid never remove the radiator cap
when the is hot The coolant is under pressure.
Re-install the top compartment cover.
Fill the radiator with coolant and install the cap, Fill the reserve
tank to the FULL level line and install the cap,
If the reserve tank is empty remove the top compartment and
radiator
cap,
for 2 3
minutes
to allow
air to escape. Run the
3-17