Engine Oil And Filter Change - Honda GoldWing GL1100 Service Manual

Maintenance
C
IO~lIr~n,..'o
Insert proper thickness feeler gauge between the valve
stem and screw.
clearance the lock nut and the
screw until there is a on the feeler
gauge. Hold the screw and the lock nut.
Recheck valve clearance.
adjustment wrench:
PIN 07908~3230000
filter bolt. and oil
mark hole cap and
Change
drain
oil with the
its center stand to assure com[)lete
2 • Intake
• Exhaust
No.3 Intake
No.4· Exhaust
Remove oil filler
cover.
Rotate the generator rotor clockwise one turn
and the T-l mark with the index mark. Make
the No.2 is at TDC on the
stroke.
NOTE: ChainQ€
Check valve clearance for these valves:
check that the drain
condition and install the
Reol;lce the oil filter, Check that the oil filter bolt and cover
condition,
14