Starter Clutch Disassembly; Starter Drive Removal - Honda GoldWing GL1100 Service Manual

Install the rotor holder, then remove the rotor bolt.
Remove the rotor.
CAUTION: The rotor nine Be pretps!red to
support it when it comes off the shaft.
that are part of the
as:sernblv may fallout when the
NOTE:
starter over-rUlinina
rotor is removed.
Clutch
Remove the three rollers from the
"''''''Ar1l1hh,
and
them for flat spots. See that move up and down
their ramps.
Remove the and caps and
InSpel~t
them for wear.
Reolclce if necessary.
NOTE: Worn or corroded ""'''!I'us. caps, or rollers
will
often
cause the starter to
without the or will
emit a loud noise as the is rotated.
Remove the sOI'ocket tab and starter drive spl'ocket from the
shaft.
16..9